LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Bench Seat/Single Seat, Removing And Installing >> Third Row Seat, Removing And Installing >> Removing

Third Row Seat, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the second row seats into the forwardmost position.

-- Fold the outer second row seats forward.

-- Remove the guide for the lower child seat anchor. Refer to LOWER CHILD SEAT ANCHOR GUIDE, REMOVING AND INSTALLING, SECOND AND THIRD ROW .

-- Grasp with both hands on one side under the seat cushion frame.

GWWA72-12120Courtesy of AUDI OF AMERICA, LLC

-- Pull the seat cushion -1- up forcefully with both hands -arrow A- so the wire hooks -2- on the seat cushion frame release from the mounting grommet -3-.

-- Repeat the procedure on the opposite side -arrow B-.

-- Disengage the seat cushion from the seat frame and remove from the vehicle.

-- Disconnect the connectors -1, 2 and 3- by releasing the catch.

GWWA72-12137Courtesy of AUDI OF AMERICA, LLC

-- Repeat this procedure on the opposite side.

-- Remove the luggage compartment floor bracket. Refer to LUGGAGE COMPARTMENT CARPET BRACKET, REMOVING AND INSTALLING .

-- Remove the bolts -1 and 2-.

GWWA72-12121Courtesy of AUDI OF AMERICA, LLC

TIP:

A second technician is required to remove the seat frame -3-.

-- To protect the rear bumper before prying out the seat frame, install the :VAS871 001  as shown.

GWWA72-12171Courtesy of AUDI OF AMERICA, LLC

-- With the help of a second technician, lift the seat frame out of the vehicle toward the rear through the lid opening.