Seat Low, Removing And Installing, Outer Second Row: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery ground cable when the ignition is turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

-- Move the front seats all the way forward.

-- Remove the seat cushion. Refer to COVER AND CUSHION, REMOVING AND INSTALLING, SECOND ROW SEAT PAN LOW .

-- Remove the stand support trim panel on the side sill side. Refer to STAND SUPPORT FRONT TRIM PANEL ON SIDE SILL SIDE, REMOVING AND INSTALLING, SEAT LOW, OUTER SECOND ROW .

-- Remove the stand support trim panel on the tunnel side. Refer to TUNNEL-SIDE STAND SUPPORT TRIM PANEL, REMOVING AND INSTALLING, SEAT LOW, SECOND ROW .

-- Release and disconnect the connectors on the connector station.

-- Connect the :VAS6282 to the thorax airbag harness connector. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- To protect the sill panel before prying out the rear seat, attach the :VAS871 001 as shown.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat from the vehicle with a second technician.