Seat High, Removing And Installing, Center Second Row: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Slide seat toward rear.

-- Remove the hinge trim panel on the tunnel side. Refer to TUNNEL-SIDE HINGE TRIM PANEL, REMOVING AND INSTALLING, SEAT HIGH, OUTER SECOND ROW .

-- Release, disconnect and free up the connector -5- for the Center Second Row Seat Belt Switch -F391-.

Courtesy of AUDI OF AMERICA, LLC

Ignore the other -items-.

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Fold the backrests of the outer seats forward and fold the seats forward.

-- Push seat forward.

Courtesy of AUDI OF AMERICA, LLC

-- Fold the backrest forward.

-- Remove the left and right seat rail trim panel. Refer to SEAT RAIL TRIM PANEL, REMOVING AND INSTALLING, SEAT HIGH, CENTER SECOND ROW .

-- Remove the bolts -arrows-.

-- To protect the sill panel before prying out the rear seat, attach the :VAS871 001 as shown.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the seat from the vehicle with a second technician.