Upper Center Seat Rail Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .
-- Remove the threaded pin -3- and remove the expanding clip -2- from the upper center seat rail cover -1-.
-- Release the rear hook at the inside of the seat rail -arrow-, and lift up the rear cover slightly.
-- Release the upper center seat rail cover by sliding in the direction of travel, and remove it.