LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Seat Side Trim/Control Module/Compressor Bracket, Removing And Installing >> Installing

Seat Side Trim/Control Module/Compressor Bracket, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Insert the bracket for the front trim -arrows-. When doing this, make sure the tabs -1- fit into the brackets -2, 3 and 4-.

GWWA72-12016Courtesy of AUDI OF AMERICA, LLC

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals