Seat Side Trim On Tunnel Side, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Unscrew the front seat and tip forward with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Release the backrest cover tension bands -arrow- at the bottom of the seat pan.
-- Remove the expanding rivet -1-.
-- Press down the tab -arrow- at the inside of the seat rail.
-- Remove the seat side trim on the tunnel side -2-.