Seat Angle Adjuster, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the front seat into its highest position.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the bolt -1- for the seat angle adjustment motor adjusting spindle.
-- Release and disconnect the connector -2- from the seat angle adjustment motor.
-- Remove the bolts -4- and the seat angle adjustment motor -3-.