Overview - Headrest, With Headrest And Angle Adjustment
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Backrest Frame
- Headrest Guide
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Press until all three retainers are completely locked into the backrest frame
- Bolt
- Depending on vehicle equipment quantity of 2 or 4
- 2.5 Nm
- Support
- For the headrest trim
- Removing and Installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Headrest
- Cannot be disassembled
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Must be correctly locked in the headrest guides
- Rear Trim
- For the headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Clips
- Rear Gap Covers
- Front Gap Covers
- with beveled corners
- Front Trim
- For the headrest
- Removing and Installing. Refer to HEADREST, REMOVING AND INSTALLING, HEADREST WITH HEIGHT AND ANGLE ADJUSTER .
- Clips