Headrest, Removing And Installing, Headrest With Height And Angle Adjuster: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Equipped on some models: remove the multimedia system display unit. Refer to OVERVIEW - REAR SEAT ENTERTAINMENT SYSTEM .
-- Position the backrest toward the rear at an angle.
-- Grab the rear cover -1- at the lower edge and slide upward out of the locking mechanism -arrows-.
-- Move the headrest completely upward and forward.
-- Fold the rear trim -1- upward and disengage the hooks -arrows- from the front cover.
-- Loosen the front trim -1- at both retainers -arrows- using a small screwdriver and remove it.
-- Slide the gap covers upward, disengage the springs -arrow- toward the rear alternating at both headrest guides, and pull the headrest base upward at the same time.