LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Front Seat Switch/Switch Module, Removing And Installing >> Removing

Front Seat Switch/Switch Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the seat side trim on the side sill side. Refer to SEAT SIDE TRIM ON SIDE SILL SIDE, REMOVING AND INSTALLING .

Equipped on some models:

GWWA72-12197Courtesy of AUDI OF AMERICA, LLC

-- Carefully unclip the rocker -1- from the switch module using the :3409  .

Driver Seat Lumbar Support Adjustment Switch - E176- / Front Passenger Seat Lumbar Support Adjustment Switch -E177-

Fig 1: Bolts & And Switch Module
GWWA72-11199Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and switch -2-.

Driver Seat Switch Module -E663- / Front Passenger Seat Switch Module - E664-

GWWA72-12492Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the switch module -1-.