LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Valve Block 2 In Driver / Front Passenger Seat -N476- / -N478-, Removing And Installing >> Installing

Valve Block 2 In Driver / Front Passenger Seat -N476- / -N478-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Route the pneumatic lines in the cushion and connect them to the valve block.

-- Attach the pneumatic lines until they engage audibly.

-- Apply the bonding with double-sided adhesive tape at the same location it was at the time of removal.

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals