Pneumatic Seat Compressor, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Unscrew the front seat and tip to the rear with the wires attached. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Remove the rubber fastener from the brackets on the compressor -1- -arrows-.
-- Press the safety catch -arrow A- to disconnect the connector -1-
-- Remove the pneumatic line -2- by carefully lifting the safety catch slightly with a small screwdriver -arrow B-