Airbag Control Module -J234-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
-- Disconnect the battery ground cable when the ignition is turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
-- Remove the center console support or center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .
-- Remove the nuts -arrows-.
CAUTION:
Pyrotechnical components can deploy unintentionally.
There is a risk of injury.
- Discharge static electricity by briefly touching the door striker.
-- Carefully lift the airbag control module -1- from the threaded pins and remove it.
-- Disconnect the connectors -2 and 3- by releasing the connector safety catch and securing clip on the connector.