Center Console Insert, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition.
-- Shift the selector level into "P" position.
-- Remove the selector lever handle. Refer to the appropriate service information .
-- Remove the liner mat -1- and remove the bolt -2- behind it.
-- Starting at the back, reach with the hand under the center console insert and carefully remove it upward from the center console -arrows-.
-- Carefully pull the center console insert -3- out toward the rear, disconnect the connectors and remove it.