Telephone/Telematics Control Module -J526-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the right luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Release and disconnect the connectors -2- on the Telematics Interface Control Module -J1221- -1-.
-- Unclip the wiring harness -arrow A- on the bracket -3-.
-- Release the tab -arrow B- on the bracket and remove the Telematics Interface Control Module -J1221- -1- from the bracket -3-.