Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the right front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fold the carpet to the side. Refer to CARPET, REMOVING AND INSTALLING .
The Control Module for Emergency Call Module and Communication Unit -J949- is clipped into the bracket.
-- Push the retainers in the direction of -arrow B-
-- Remove the Control Module for Emergency Call Module and Communication Unit -J949- -1- from the bracket -2-.
-- Release and disconnect the connectors -3-.
Bracket, Removing
-- Remove the wiring harness from the bracket -2-.
-- Remove the nut -arrow A-.
-- Pull the bracket -2- off the threaded pin and remove it rearward from the body.