Driver Volume Control -E67-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the center console cover. Refer to CENTER CONSOLE COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connectors -1, 2 and 3-.

Fig 1: Center Console Switch Module 1 -EX23-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Release the decorative frame retainers -2- in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the switch trim -1- with the switch module -3-.

-- Release the retainers -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Driver Volume Control -E67- -1- from the front center console display cover.