LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Communication (1 Of 2)) >> 91 Communication >> Antenna Systems >> Bumper Antennas, Removing And Installing >> Bumper Antennas, Removing And Installing, From Product Improvement >> Removing

Bumper Antennas, Removing And Installing, From Product Improvement: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the rear bumper cover spoiler. Refer to OVERVIEW - BUMPER COVER .

-- Release and disconnect the connector -5-.

GWWA91-13334Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- for the bumper antenna -1-.

-- Remove the bumper antenna -1- from the bracket -4-.

-- If necessary, remove the nuts -2- and then remove the bracket -4- from the body.