Speaker Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
There is a risk of damaging the speaker trim.
- Proceed very carefully when removing and installing.
-- Carefully detach the speaker trim -1- using the : 80-200 -arrows- by sliding the wedge approximately 2 mm in the seam under the speaker trim.
-- Disengage the remaining tabs for the speaker trim along the seam.
-- Disconnect the connector and remove the speaker trim.