Overview - Rear Lid Upper Trim Panel
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Rear Lid Side Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Rubber Buffer
- Quantity: 2 each
- Insert in the trim panel
- Clip
- Quantity: 2 each
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool: T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Rear Lid Upper Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID UPPER TRIM PANEL, REMOVING AND INSTALLING .
- Rubber Buffer
- Quantity: 4
- Insert in the trim panel
- Clip
- Quantity: 4
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool: T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
- Clip
- Insert in the trim panel
- Replace damaged or deformed clips
- Rear Lid Hinge Trim Panel
- Clip onto the rear lid hinge