Overview - Rear Lid Lower Trim Panel

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Rear Lid Lower Trim Panel

Courtesy of AUDI OF AMERICA, LLC

Emergency Release Cover
- Unclip using the Trim Removal Wedge: 3409
- Clipped in the rear lid trim panel
Rear Lid Lamp
- Quantity: 2
- Removing and Installing. Refer to COMPONENT LOCATION OVERVIEW - LUGGAGE COMPARTMENT LAMPS .
Rubber Buffer
- Quantity: 14
- Insert in the trim panel
Clip
- Quantity: 16
- Insert in the trim panel
- Remove any clips remaining in the rear lid mounting points using the Omega Clip Tool: T40280 . To install, insert into the trim panel.
- Replace damaged or deformed clips
Rear Lid Latch Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
Rear Lid Closing Button
- Removing and installing. Refer to Rear Lid Lock Button in Luggage Compartment -E406-, REMOVING AND INSTALLING .
Clip
- Insert in the trim panel
- Replace damaged or deformed clips
Rear Lid Side Trim Panel
Rear Lid Lower Trim Panel
- Press on until it engages audibly
- Removing and Installing. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
Bolt
- Quantity: 2
- 2 Nm
Emergency Triangle
Cover
- For the emergency triangle
- Engaged in the rear lid trim panel