Luggage Compartment Carpet Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

-- Front passenger side: if installed, remove the luggage compartment floor. Refer to LUGGAGE COMPARTMENT FLOOR, REMOVING AND INSTALLING, UPRIGHT SPARE TIRE .

-- Remove the luggage compartment floor trim panel. Refer to LUGGAGE COMPARTMENT FLOOR TRIM PANEL, REMOVING AND INSTALLING, VEHICLES WITHOUT HIGH-VOLTAGE SYSTEM .

-- Remove the luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .

-- Remove the tie down. Refer to TIE DOWN, REMOVING AND INSTALLING .

-- Equipped on some models: remove the rail. Refer to RAIL, REMOVING AND INSTALLING .

-- Lift up the luggage compartment floor support -3-, disengage the tabs -2- on the support and remove the sill panel strip -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the luggage compartment floor support upward -arrows- and remove toward the rear.