Windshield Projection (Head-Up Display) Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Risk of damaging the trim.
- Proceed carefully when removing. The : T10383/1 must be positioned at the trim retainers.
-- Unclip the windshield projection trim -1- using the : T10383/1 -B arrows-.
-- To do so, position the : T10383/1 at the retainer -2- and slide it in direction of -arrow A- until the retainer disengages from the mount.
-- Unclip the rest of the retainers and remove the windshield projection trim -1- toward the rear.