Midrange Speaker Trim, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the door trim panel. Refer to FRONT DOOR TRIM PANEL, REMOVING AND INSTALLING .
-- Place the door trim panel on a soft and clean surface.
-- Remove the insulation mat.
-- If equipped, disconnect the connector.
CAUTION:
Risk of damaging the door trim panel.
- Be extremely careful when drilling.
-- Using a 6.5 mm drill bit, drill out the speaker trim attachment points -arrows- from the door trim panel, just until the speaker trim begins to loosen from the door trim panel.
-- Carefully loosen the attachment points one after another and remove the speaker trim -1- from the door trim panel.