Oil Pan Lower Section, Removing And Installing, Version 2: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
- Engine oil drained. Refer to ENGINE OIL .
-- Disconnect the connector -arrow- for the Oil Level Thermal Sensor -G266-.
-- Remove the bolts -1 through 17- and remove the oil pan lower section.
-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .