Upper Timing Chain Cover, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the gaskets and seals if damaged or leaking
- Replace the O-rings after removing them.
- Seal installation position: smaller inner diameter outward.
-- Install the camshaft adjustment valves. Refer to Cam Adjustment Valve 1 -N205- /Exhaust Cam Adjustment Valve 1 -N318-, REMOVING AND INSTALLING .
There are additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING .