Ribbed Belt, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Depending on the model, preliminary work may be required. Refer to RIBBED BELT, REMOVING AND INSTALLING .

CAUTION:

There Is a Risk of Injury If the Radiator Fan Turns on by Itself.

- When performing procedures near the radiator maintain a distance to the radiator.

Vehicles with Generator:

Fig 1: Ribbed Belt For Vehicles With Electro-Mechanical Power Steering

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of Destroying a Used Ribbed Belt by Reversing the Running Direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Pivot the tensioner clockwise in direction of -arrow- and lock using the : T10060A .

-- Remove the ribbed belt.

Vehicles with Starter Generator:

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of destroying a used ribbed belt by reversing the running direction.

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.

-- Use the : T10060A to lock the tensioner as shown.

-- Remove the ribbed belt.