Sensor Wheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- The engine is secured to the : VAS6095A . Refer to ENGINE, SECURING TO ENGINE AND TRANSMISSION HOLDER .
-- Remove the transmission side sealing flange. Refer to SEALING FLANGE, REMOVING AND INSTALLING, TRANSMISSION SIDE .
-- Remove the oil pan upper section. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .
-- Remove the balance shaft timing chain. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
-- Remove the connecting rod bearing cap.
-- Remove the crankshaft bearing cap.
-- Remove the crankshaft and the sensor wheel.