LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Exhaust System, Emission Controls 2.0L) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Clamping Sleeve Installation Position >> Tightening Specification Of The Clamping Sleeve

Tightening Specification Of The Clamping Sleeve

WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tightening Torque And Installed Dimension Of Clamping Sleeve
GWWN26-10627Courtesy of AUDI OF AMERICA, LLC
Clamping Sleeve Tightening Specification
Clamping sleeve -A- with two individual clamps 30 Nm
Clamping sleeve -B- with continuous clamp. 30 Nm

Tighten the threaded connections evenly.

scientia non olet · About LEMON Manuals