Reinforcement Brace, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the air filter housing. Refer to AIR FILTER 2.0L or AIR FILTER 3.0L or AIR FILTER 4.0L .
-- Remove the headlamp cover. Refer to HEADLAMP COVER, REMOVING AND INSTALLING .
-- Vehicles with high-voltage system 4-cylinder engine: remove the bolts -arrows- and free up the coolant line -1-.
-- Free up the wiring harness.
-- Remove the bolts -1 and 3-.
-- Remove the reinforcement brace -2-.