Overview - Lock Carrier
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Radiator Mount
- Only for 8-cylinder TDI engine
- Bolt
- 8 Nm
- Mount
- For headlamp
- Removing and installing. Refer to HEADLAMPS .
- Mounting Bracket with Release Cable
- For the hook release lever
- Overview. Refer to OVERVIEW - RELEASE CABLE .
- Bolt
- Quantity: 2
- Tightening Specification. Refer to OVERVIEW - RELEASE CABLE .
- Lock Carrier
- Removing and Installing. Refer to LOCK CARRIER, REMOVING AND INSTALLING .
- Reinforcement Brace
- Removing and Installing. Refer to REINFORCEMENT BRACE, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Bolt
- Quantity: 2
- 10 Nm
- Body
- Subframe
- Bolt
- Quantity: 4
- 10 Nm
- Lower Longitudinal Member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER, REMOVING AND INSTALLING .
- Bracket
- For the lower longitudinal member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER BRACKET, REMOVING AND INSTALLING .
- Bolt
- 25 Nm
- Bracket
- For the lower longitudinal member
- Removing and Installing. Refer to LOWER LONGITUDINAL MEMBER BRACKET, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 23 Nm