Lock Carrier, Removing And Installing: Notes

WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

To complete the procedure, a second technician is required to be at the following position. Refer to Removing Have a second technician hold the lock carrier -1- and remove the bolts -2 and 3-.

Special tools and workshop equipment required

Coolant Collecting System: VAS 5014
Engine Bung Set: VAS 6122

Fig 1: Engine Bung Set
Courtesy of AUDI OF AMERICA, LLC
Elbow Assembly Tool: T10118

Fig 2: Elbow Assembly Tool T10118
Courtesy of AUDI OF AMERICA, LLC