Overview - Fender Bracing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Quantity: 3
- Tightening sequence. Refer to Fig 2.
- Bolt
- Tightening sequence. Refer to Fig 2.
- Bolt
- Quantity: 2
- Tightening sequence. Refer to Fig 2.
- Bolt
- Quantity: 2
- 25 Nm
- Bolt
- Quantity: 3
- 25 Nm
- Tension Strut
- Removing and Installing. Refer to TENSION STRUT, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 25 Nm
- Bolt
- Quantity: 2
- 25 Nm
- Lower Reinforcement
- For the tension strut
- Bolt
- Quantity: 2
- 25 Nm
- Upper Reinforcement
- For the tension strut
- Bolt
- Quantity: 2
- 25 Nm
- Support
- For wheel blocker cover
- Removing and Installing. Refer to WHEEL BLOCKER COVER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 2
- 25 Nm
- Wheel Blocker Cover
- Removing and Installing. Refer to WHEEL BLOCKER COVER, REMOVING AND INSTALLING .
- Bolt
- Quantity: 4
- Tightening sequence. Refer to Fig 2.
- Bolt
- Quantity: 2
- Tightening sequence. Refer to Fig 2.
Wheel Blocker Cover - Tightening Specification and Sequence
-- Tighten the bolts in the sequence shown.
| Bolts | Tightening Specification |
|---|---|
| -1 to 6, 11, 12- | 25 Nm |
| -7 through 10- | 36 Nm |