Fender, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the drip rail. Refer to DRIP RAIL, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Open the front door.
-- Remove the bolt -2-.
-- Remove the rear cover for the fender. Refer to REAR FENDER COVER, REMOVING AND INSTALLING .
-- Remove the wheel cover. Refer to WHEEL ARCH TRIMS, REMOVING AND INSTALLING, FRONT, BEFORE PRODUCT IMPROVEMENT .
-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
-- Remove the windshield washer fluid reservoir. Refer to WINDSHIELD WASHER SYSTEM .
-- Remove the bolts -1 and 2-.
-- Remove the bolts -2 and 3-.
-- Remove the fender -1-.