Plenum Chamber End Plate, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the upper cover for the plenum chamber end plate. Refer to PLENUM CHAMBER END PLATE UPPER COVER, REMOVING AND INSTALLING .
-- Remove the additional reinforcement for the tower brace. Refer to SUSPENSION STRUT AND UPPER CONTROL ARM .
-- Remove the bolts -arrows-.
-- Remove the plenum chamber end plate -2- from the additional reinforcement -1-.