Plenum Chamber End Plate Lower Cover, Removing And Installing, Right Side: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber end plate. Refer to PLENUM CHAMBER END PLATE, REMOVING AND INSTALLING .
-- Remove the fresh air intake. Refer to AIR DUCT .
-- Remove the nuts -arrows-.
-- Free up the wiring harness -2-.
-- Lift the cover -1- and remove it from the body -3-.