Overview - Bulkhead

WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Bulkhead

Courtesy of AUDI OF AMERICA, LLC

Seal
Grommet
- for coolant lines
Bolt
- 10 Nm
Plenum Chamber Bulkhead
- Removing and Installing. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
Bolt
- Quantity: 4
- 10 Nm
Plenum Chamber End Plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE, REMOVING AND INSTALLING .
Upper Cover
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE UPPER COVER, REMOVING AND INSTALLING .
Lower Cover
- For the plenum chamber end plate
- Removing and Installing. Refer to PLENUM CHAMBER END PLATE LOWER COVER, REMOVING AND INSTALLING .
Nut
- Quantity: 3
- 3 Nm
Grommet
- For the brake booster vacuum line
Bolt
- 10 Nm