Special Tools
WARNING: This page is about a different car, the 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Seal Installer - Selector Shaft Oil Seal: T10174
- Refrigerant Sockets: T10364/4
- Contact Protection Cap: T10544
- Puller - Crankshaft/Power Steering Seal 2: T20143/2
- Retaining Strap: T40155 (quantity 2)
- Gearbox Support: T40173
- Puller - Clutch Module: T40176
- Service Disconnect Lock - Padlock: T40262/1
- Wrench - 21mm: T40263
- Adapter: T40314
- Cooling System Tester: VAG1274B with Cooling System Tester - Hose Adapter Set - Adapter: VAG1274B/14-4
- Torque Wrench 1332 Insert - Ring Wrench - 16mm: VAG1332/14
- K-Jetronic Fuel System Tester: VAG1371
with K-Jetronic Fuel System Tester - Adapter: VAG1371/7
- Shop Crane: VAS6100
- Engine Bung Set: VAS6122
- Coolant Collection System: VAS5014 or Shop Crane - Drip Tray: VAS6208
- Hose Clip Pliers: VAS6340
- Hose Clip Pliers: VAS6362
- Test Adapter - Hybrid Module: VAS6558A
- Warning Sign - High Voltage: VAS6649
- Warning Sign - Switch: VAS6650A
- Wheel Alignment System: VAS6762
- Engine and Gearbox Jack: VAS6931
- Torque Wrench Adapter: VAS6948
- Release Tool: VAS531001
- USB Adapter for E-Tron Charger System: VAS681001
- Turbo System Tester Kit - Adapter 10: VAG1687/10
- Test Set: VAS691005
- 8 mm Shackle: VAS691007
(quantity 3)
- 10 mm Shackle: VAS691009
(quantity 2)
- Pry Lever: 80-200
- Hose Clamps - Up To 25 mm: 3094
- Transmission Support: 3282
- Transmission Support - Pins 45: 3282/45
- Transmission Support Jig: 3336
- Not Illustrated:
- Diagnostic Box: VAS5581
- High Voltage Tool Set: VAS6762
- Connector Seal: T40348
- Connector Seal: T40349
- Module Balancer: VAS6910
- High Voltage Tool Set - Torque Wrench: VAS6883/1
- Insulated Torx Wrench Set - 3/8: VAS691003
- Spring-Type Clip Pliers: VAS6856