Fuel Tank Leak Detection Control Module -J909-, REMOVING AND INSTALLING, AUDI Q7: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .
-- Remove the right rear underbody trim panel. Refer to UNDERBODY TRIM PANELS, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the nuts -arrows- and remove the control module -2-.