Suspension, AUDI Q8
WARNING: This page is about a different car, the 2022 Audi SQ7, 2022 Audi S7, and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
| Front axle |
Multi-link suspension, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics, guide link with hydraulic damping mounts |
| Rear axle |
Multi-link suspension with suitable spring/shock allocation, transverse stabilizer coil springs: twin gas-filled struts, coil springs air suspension: air suspension strut with variable levels and damping characteristics |
| Chassis |
Standard coil springs 1BL in curb weight position. Refer to TEST REQUIREMENTS, AUDI Q7 =>
. |
Standard air suspension 1BK/2MA/2MB at standard level TEST REQUIREMENTS, AUDI Q7 => |
|
| Wheelbase |
mm |
2995 |
2998 |
|
| Front track width |
mm |
1679 |
1683 |
|
| Rear track width |
mm |
1691 |
1693 |
|
- The specified values apply to all engine types.
- Front/rear track width only applies to 265/55R19 tires on 8.5Jx109 rims.
- Track widths change when using different wheel/tire combinations.
- The specified size applies to equipment levels with air suspension on the standard vehicle height.