Exhaust Temperature Regulation Components, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.
-- Coat the exhaust gas temperature sensor thread with hot bolt past. Refer to the Parts Information.
- The hot bolt paste must not get on the slots on the exhaust gas temperature sensor.
- Pay attention to the installation position. Refer to OVERVIEW - EXHAUST TEMPERATURE REGULATION .