HOUSING FOR Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work may be required depending on the model. Refer to Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
-- Remove the oil dipstick tube -item 7- : Oil Dipstick Tube .
-- Place the Shop Crane - Drip Tray: VAS6208 underneath.
-- Remove the bolts -1 to 9- and remove the housing for Map Controlled Engine Cooling Thermostat -F265-. (Shown on Audi A8 / S8.)