Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Replace the seal after removal.
Check the vacuum hoses for damage before the assembly and replace if necessary.

-- If removed, install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Install the housing for the Map Controlled Engine Cooling Thermostat -F265-. Refer to HOUSING FOR Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .