Oil Pan Lower Section, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil drained. Refer to ENGINE OIL .
Depending on the model, preliminary work may be required. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Disconnect the connector -arrow- from the Oil Level Thermal Sensor -G266-.
-- Free up the wires.
-- Place a cloth underneath to catch any escaping engine oil.
-- Loosen and remove the bolts in the following sequence: -18 to 1-.
-- Loosen and remove the oil pan lower section carefully from the bonding.