Vibration Damper, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the model, preliminary work may be required. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .
-- Remove the ribbed belt for the starter generator. Refer to STARTER GENERATOR RIBBED BELT, REMOVING AND INSTALLING .
-- Remove the cover.
-- Remove the bolt -arrow- and the idler roller.
-- Place the Adapter : T40330/5 with Counterholder: T40330/1 on the vibration damper and secure using the M8x35 bolt -arrow- ; from the Counterholder: T40330 (23 Nm), by placing the Spacer Sleeve: T40330/3 underneath.
-- Remove the bolt -1-.
-- Remove the bolt -arrow- and remove the counterholder and vibration damper.