LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Crankshaft, Cylinder Block Servicing 4.0L) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> Starter Generator Bracket, Removing And Installing >> Removing

Starter Generator Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter generator. Refer to GENERATOR, REMOVING AND INSTALLING .

Audi A8 / S8: 

GWWA13-11302Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow- from the right rear coolant pipe and the other bolts -1-.

All: 

-- Remove the bolts -2 and 3- and the bracket -4-.