LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Crankshaft, Cylinder Block Servicing 4.0L) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Sub-Assembly Bracket, Removing And Installing >> A/C Compressor Bracket, Removing And Installing >> Removing

A/C Compressor Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

All Vehicles Excluding RSQ8 / SQ8 / SQ7: 

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Audi RSQ8 / SQ8 / SQ7: 

-- Remove the A/C compressor from the bracket and tie it up on the left side. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET .

Continuation All Vehicles: 

Fig 1: A/C Compressor Bracket -1-
GWWA13-11304Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2 and 3- and the bracket -1- for the A/C compressor.