LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ7 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Crankshaft, Cylinder Block Servicing 4.0L) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> A/C Compressor Ribbed Belt, Removing And Installing >> Installing

A/C Compressor Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Audi SQ7. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Install the ribbed belt. Refer to Figure.

-- Check whether the ribbed belt is routed correctly.

-- Start the engine and check the ribbed belt routing.

There are different procedures depending on the model. Refer to RIBBED BELT, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals