Overview - Door
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Door
- Removing and Installing. Refer to DOOR, REMOVING AND INSTALLING .
- Bolt
- 33 Nm
- Door Arrester
- Installation position. Refer to Fig 3.
- Removing and Installing. Refer to DOOR ARRESTER, REMOVING AND INSTALLING .
- Cap
- For the door arrester
- Installation position. Refer to Fig 2.
- Bolt
- 50 Nm
- Upper Door Hinge
- Nut
- 32 Nm + 45°
- Set Screw
- 27 Nm
- Cap
- Bolt
- 32 Nm + 45°
- Lower Door Hinge
- Bolt
- 32 Nm + 45°
- Set Screw
- 27 Nm
- Cap
- Bolt
- 50 Nm
- Bolt
- Replace after removing
- Quantity: 2
- 8 Nm
Cap Installation Position
In the installed position, the lettering on the cap -1- must be readable in the upper installation position.
2 - LEFT UPPER REAR - left / RIGHT UPPER REAR - right
3 - HL - left / HR - right
Door Arrester Installation Position
In the installed position, the lettering on the door arrester -1- must be readable in the upper installation position:
2 - HL - left / HR - right