Outer Window Shaft Strip, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Audi Q7, 2021 Audi Q7, and 2020 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Move the door window into the "open" position.
-- To prevent damage, tape off the Backrest Panel Tool: 3370 and the C-pillar trim with adhesive tape -2-.
-- Guide the Backrest Panel Tool: 3370 from behind in the window shaft strip -arrow A-.
-- Remove the window shaft strip with the Backrest Panel Tool: 3370 carefully in the rear area upward from the door flange -arrow C-.
-- Remove the window shaft strip with both hands to the B-pillar from the door flange -B arrows-.